Join our mailing list!

You are here:Home > ATV Parts > Linhai Bighorn UTV 400 LX
Choose a sub category:
Fender of Linhai Bighorn UTV 400 LX Parts Frame of Linhai Bighorn UTV 400 LX Parts

Big Horn 400 LX

Vehicle Model LH400CUV
Length×Width×Height 2683×1460×1890 mm
Wheelbase 1805mm
Seat height 850mm
Mini Ground Clearance 170mm
Mini Turning Diameter 4500mm
Fuel Capacity 26L
Weight 516kg
Payload Capacity 300kg
Drive Switchable 2WD/4WD
Engine Type No. LH180MQ
Classis Brake Hydraulic
Suspension Front: McPherson independent suspension;Rear: Twin-A arm independent suspension
Shock Absorber Spring Preloaded,Oil Damping
Rim Front: AT25X8-12 Rear: AT25X10-12
Tire Pressure(kpa) Front:35kPa;Rear: 35kPa
Certificate EEC/EPA
Loading QTY. of 40'HC 18
Type No. LH180MQ
Model One Cylinder、4-Stroke、Water and Oil Cooling, SOHC
Displacement 352cc
Bore and Stroke 80×70 mm
Compression Ratio 9.8:1
Max torque and REV 27Nm/5500(r/min)
Max Output Power 14.8KW/7000-7500(R/MIN)
Max Speed 68km/h
Start Type Electric
Ignition Type TCI
Transmission CVT

The Linhai Bighorn Side-by-side UTV 400 LX parts different with Linhai Bighorn Side-by-side UTV 400IRS is bed: 400 LX is longer bed and metal bed, while 400IRS has smaller bed; 400 LX has higher cab than 400 IRS


  • liquid cooled engine
  • CVT Transmission
  • 2-Speed Transfer Case with High/Low and Reverse
  • 4x4 with shaft drive
  • 4 Wheel Hydraulic Discs
  • McPherson Strut / Double A-Arm Fully Independent
  • Hydraulic assist Dump Bed Underseat Storage
  • High Capacity winch optional w/ wireless remote